• 3D Printing for Civil Engineering and Construction

    Ir. Ronan Collins was invited by the Innovation & Technology Committee of the British Chamber of Commerce in Hong Kong to participate in a panel discussion on how the deployment of 3D printing may transform the construction industry. The panel members included Dr Liu King-Lok, Clinical Assistant Professor of Department of Orthopaedics & Traumatology at The Chinese University of Hong Kong, Harvey Chung, co-founder of Maker Lab and Director of Design & Education at 3D Forge, Jason Cawdell founder of Jumping Monkey and Creative Head at HTI and was moderated by Jeremy Cheng, co-founder of Maker Lab. The panel members presented how 3D printing is transforming healthcare, manufacturing, toy design, architecture, engineering and construction. InteliBuild have experience in the use of 3D Printi...

    published: 28 Jan 2016
  • CAREERS IN PRINTING TECHNOLOGY – Print Media,Diploma,B.Tech,M.Tech,Certificate courses,Job openings

    CAREERS IN PRINTING TECHNOLOGY.Go through the career opportunities of PRINTING TECHNOLOGY, Govt jobs and Employment News channel from Freshersworld.com – The No.1 job portal for freshers in India. Visit http://www.freshersworld.com?src=Youtube for detailed Career information,Job openings details of PRINTING TECHNOLOGY. Printing technology is not as common and familiar to most of us as engineering and medical does. Printing technology is something that includes a process to be covered for imprinting images and texts onto a plate (called as impression) by majorly using templates or a master form. Every day we see around us, a varied printed material in the form of newspapers, magazines, brochures, catalogues, advertisements, posters, billboards, hoardings, boxes & cartons & much more. Al...

    published: 19 Jun 2015
  • 3D Printed Subaru WRX Engine - How Boxer Engines Work

    How Boxer Engines Work - 3D Printed Subaru WRX Engine Boxer-4 Model: https://www.thingiverse.com/thing:1643878 Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 What is a flat four? What is a boxer engine? This video will explain the benefits of a flat engine, specifically a flat four engine with horizontally opposed pistons. The main advantages of a boxer engine are the primary and secondary engine balance, and the very low center of gravity compared to other engines. H4 engines are one of the best engine designs, however they are more costly than the inline counterpart. The biggest advantage of the boxer engine is the low profile, which keeps the center of gravity low and thus reduces the amount of load transfer you have in the car during braking, cornering, or acceler...

    published: 12 Jul 2017
  • Department of Printing and Media Engineering, Manipal University

    The Department of Printing and Media Engineering has the distinction of being the one among the few institutes across India offering a Bachelor’s degree in Print and Media since 1992. The department provides comprehensive in-depth study in modern Graphic Arts Technology and Media Sc

    published: 22 Feb 2017
  • 3d printing, a diverse tool for engineers, designers and students | Aaron Jenings | TEDxVarna

    3D printing is one of the most promising new technologies of our current time, and his goal is to help designers, engineers and students realise its potential and adopt it as a powerful tool in their conceptual and prototyping processes. Aaron Jennings is an industrial designer with a level 1 BcS in Product design. Since 2010, the beginning of his career as a designer, Aaron has utilised 3D printing from prototyping to final working demonstrative devices for the medical and household industry. With his years experience and knowledge of 3D printing, Aaron joined Polymaker - a company engineering and developing the best and most innovative materials for the 3D printing industry. This talk was given at a TEDx event using the TED conference format but independently organized by a local c...

    published: 28 Feb 2017
  • Road Printing Machine

    published: 14 Jan 2014
  • 3D printing human tissue: where engineering meets biology | Tamer Mohamed | TEDxStanleyPark

    A record amount of money is spent developing new drugs, but drug approval rates are declining and many fatal diseases are left untreated. A big reason behind this is often times current drug testing methods including animal testing don’t accurately predict the human response to drugs. What if we can 3D print living human tissue to test new drugs and study disease? Tamer Mohamed talks about how 3D printing human tissue will allow us to develop better, safer, and cheaper drugs while reducing our reliance on animal testing. Beyond drug development, Tamer imagines a future where replacement organs are 3D printed using a patient’s own cells, avoiding organ wait lists and the risk of rejection. Tamer Mohamed is a biomedical engineer, innovator, and entrepreneur. He is President and CEO of As...

    published: 05 Apr 2017
  • Printing Vascular Tissue

    Printing vessel vasculature is essential for sustaining functional living tissues. Until now, bioengineers have had difficulty building thick tissues, lacking a method to embed vascular networks. A 3D bioprinting method invented at the Wyss Institute and Harvard SEAS embeds a grid of vasculature into thick tissue laden with human stem cells and connective matrix. Printed within a custom-made housing, this method can be used to create tissue of any shape. Once printed, an inlet and outlet own opposite ends are perfused with fluids, nutrients, and cell growth factors, which control stem cell differentiation and sustain cell functions. By flowing growth factors through the vasculature, stem cells can be differentiated into a variety of tissue cell types. This vascularized 3D printing proce...

    published: 07 Mar 2016
  • 3D printing tiny batteries | Harvard School of Engineering and Applied Sciences

    In this video, 3D printing is used to deposit a specially formulated "ink" through a fine nozzle to build a microbattery's anode layer by layer. Unlike an office inkjet printer that dispenses ink droplets onto paper, these inks are formulated to exit the nozzle like toothpaste from a tube and immediately harden into thin layers. The printed anode contains nanoparticles of a lithium metal oxide compound that provide the proper electrochemical properties. To read more about the research, please visit http://hvrd.me/rDgoe. Date: June 18, 2013 Author: Ke Sun, Teng-Sing Wei, Bok Yeop Ahn, Jung Yoon Seo, Shen J. Dillon, and Jennifer A. Lewis

    published: 19 Jun 2013
  • 3D Printing a Model of a Functional Vise! Created from the Ox Tools, Wilton Baby Bullet Vise project

    I wanted to create a holder for my soldering projects, and I decided to 3D print a vise created from a model that Tom, over at Ox Tools put out for his machining project. ▼You can find the model here: http://www.thingiverse.com/thing:1572431 ***This is a model of a functional vice, and should not be used AS a real vice. 3D printed plastic can break and fly apart in unpredictable ways under pressure*** Be sure to check out Tom's amazing videos bringing the real vise to life! In this video I'll go through the steps I took to modify his models, and assembling the functioning vise. I made the changes to the model in Autodesk Fusion 360, printed it on my LulzBot Mini 3D printer. Here is the link to the latest Ox Tools video on the Wilton Baby Bullet Vise: https://www.youtube.com/watch?v...

    published: 25 Apr 2016
  • Study Product Design Engineering at Swinburne

    Explore the design and development of innovative, sustainable products with a Swinburne product design engineering degree. Learn how you can bring your ideas to life through this unique combination of industrial design and engineering.

    published: 01 Sep 2015
  • RIT Students Engineer Historical Printing Press

    A group of four RIT engineering students and a museum studies student set out to reproduce a historically accurate wooden common printing press for the RIT Cary Collection. This is the story of how they brought the past to life through engineering. For more on the project visit: http://www.rit.edu/news/story.php?id=58780

    published: 15 Dec 2016
  • Stratasys 3D Printing Reaches New Heights in Aerospace Engineering at ULA

    The growing impact of additive manufacturing in aerospace is best exemplified at United Launch Alliance. In this video, you'll learn how ULA engineers are using Stratasys FDM-based 3D Printers for everything from rapidly prototyping flight parts to producing over 300 tools that increase efficiency on the factory floor to creating innovative new designs for the next generation Vulcan rocket. A few exciting things you'll want to to watch for here: * Practical examples of how ULA is using over 300 printed tools in their manufacturing process * A propulsion component that was re-designed to be "cheaper, lighter and actually performed better" using 3D printing * How ULA is working with Stratasys in materials development, for capabilities like ESD and aero-thermal performance

    published: 14 Apr 2016
  • What is Printing? An American Explains Studying Print Engineering in Germany

    It's been a few weekends in the making, but it's finally finished. This is both meant to be a summary of our recent excursions to local companies in the industry as well as information for anyone interesting in learning more about print. (These clips all come from an event held every semester at the HdM, the Exkursionswoche.) I hope this video gives you an idea of why print is a fascinating field of study! A big thanks goes out to all of the companies who led our tours, the university Hochschule der Medien, and Mindful Music for the soundtrack.

    published: 28 May 2017
  • Printing, Exporting and Creating Engineering Report Templates

    An introduction to printing, exporting and creating Engineering Report templates in SCIA Engineer

    published: 24 May 2017
  • 3D printing of sustainable concrete structures

    The goal of the TU/e 3D Concrete Printing (3DCP) research program is to establish concrete printing as a new method to manufacture concrete elements and buildings, and to fundamentally understand its processes. The research group operates and develops its own 3D Concrete Printer at the department of the Built Environment. The program is run by the chair of Concrete Structures of the Unit Structural Design, in close collaboration with the chair of Innovative Structural Design and chair of Architectural Design and Engineering.

    published: 03 Mar 2016
3D Printing for Civil Engineering and Construction

3D Printing for Civil Engineering and Construction

  • Order:
  • Duration: 7:07
  • Updated: 28 Jan 2016
  • views: 6201
videos
Ir. Ronan Collins was invited by the Innovation & Technology Committee of the British Chamber of Commerce in Hong Kong to participate in a panel discussion on how the deployment of 3D printing may transform the construction industry. The panel members included Dr Liu King-Lok, Clinical Assistant Professor of Department of Orthopaedics & Traumatology at The Chinese University of Hong Kong, Harvey Chung, co-founder of Maker Lab and Director of Design & Education at 3D Forge, Jason Cawdell founder of Jumping Monkey and Creative Head at HTI and was moderated by Jeremy Cheng, co-founder of Maker Lab. The panel members presented how 3D printing is transforming healthcare, manufacturing, toy design, architecture, engineering and construction. InteliBuild have experience in the use of 3D Printing of models for building prototypes and scale models. We expect that there will be a growth in the demand and use of these types of models for design reviews and presentations to developers by architects as it becomes quicker and cheaper to 3d print the models. We have also seen contractors, such as Gammon Construction, adopt 3D printing for planning of their works on site and communication of construction sequences to civil engineers and site workers using scale models. In some cases, the contractors have used detailed part models to review steel connection details and E&M pipe assemblies. The use of additive manufacturing for the production of built assets remains a futuristic idea. Examples of laser metal deposition and contour crafting were presented by Ir. Collins. All of the content used in the presentation is referenced below. InteliBuild http://www.intelibuild.com The British Chamber of Commerce in Hong Kong http://www.britcham.com 3D Printing of Furr High School Model https://youtu.be/zYMtqaSILhE Ero Architects http://goero.com/current/innovation.html#technology Gammon Construction Midfield Concourse, Hong Kong International Airport Tseung Kwan O, Residential Site Formation Tsuen Mun Chek Lap Kok Link, Precast Concrete Viaducts http://www.gammonconstruction.com Laser metal deposition manufacturing (LMD) TWI https://youtu.be/yKnlmfuMSgo A 5 axis laser metal deposition manufacturing method is being developed by TWI. A weld track is formed using metal powder as a filler material which is fed, through a coaxial nozzle, to a melt pool created by a focused high-power laser beam. By traversing both the nozzle and laser, a new material layer develops with precise accuracy and user-defined properties. http://www.merlin-project.eu/ http://www.twi-global.com Loughborough 3D Concrete Printing https://youtu.be/EfbhdZKPHro Concrete Printing Process developed at Loughborough University in the UK is capable of producing building components with a degree of customisation that has not yet been seen. It could create a new era of architecture that is adapted to the environment and fully integrated with engineering function. http://www.buildfreeform.com/
https://wn.com/3D_Printing_For_Civil_Engineering_And_Construction
CAREERS IN PRINTING TECHNOLOGY –  Print Media,Diploma,B.Tech,M.Tech,Certificate courses,Job openings

CAREERS IN PRINTING TECHNOLOGY – Print Media,Diploma,B.Tech,M.Tech,Certificate courses,Job openings

  • Order:
  • Duration: 4:32
  • Updated: 19 Jun 2015
  • views: 8584
videos
CAREERS IN PRINTING TECHNOLOGY.Go through the career opportunities of PRINTING TECHNOLOGY, Govt jobs and Employment News channel from Freshersworld.com – The No.1 job portal for freshers in India. Visit http://www.freshersworld.com?src=Youtube for detailed Career information,Job openings details of PRINTING TECHNOLOGY. Printing technology is not as common and familiar to most of us as engineering and medical does. Printing technology is something that includes a process to be covered for imprinting images and texts onto a plate (called as impression) by majorly using templates or a master form. Every day we see around us, a varied printed material in the form of newspapers, magazines, brochures, catalogues, advertisements, posters, billboards, hoardings, boxes & cartons & much more. All these are the means of spreading some or other content to large group of people. Printing is all about creating a vehicle for particular information to spread. Printing technology derived out of the need for information to be spread on a large scale i.e. ‘publishing’ the information. The material to be spread hand to hand has to be produced on either paper or similar medium called substrate. For a layman point of view printing is just means to get identical copies in numbers. For a technical point printing is transferring ink on a substrate from a source. Courses for this field are usually taken in the form of post secondary certificate, degree or a diploma. Following is a list of courses that are usually offered in this program/ course: Offset printing: Offset printing is a widely used printing technique where the inked image is transferred (or “offset”) from a plate first to a rubber blanket, then to the printing surface. Screen printing: In screen printing, the printing ink is pressed onto the substrate through a screen or a stencil. For this a squeegee is drawn across the printing form, which forces the ink through the screen’s open mesh. Letterpress printing: On letterpress printing press the printing areas are higher than the non-printing areas. A right-reading negative film that is subjected to ultra-violet radiations in contact with a carrier plate coated with a polymer sable layer serves as the copy master for direct letterpress printing. Opportunities that could be opted whilst after a printing technology course are as follows: • Publishing houses under central and State Govt. • Printing Presses under Central and State govt. • Commercial printing presses doing Offset, Flexography, Gravure and Screen printing • Publishing houses in private sector • Security printingSoftware solution for print industry • Pre-press solution for printing Industry • Designing and digital printing • Electronic publishingColor management solution • PackagingPrint finishing and converting • Machine manufacturing /service • Marketing/management executive • Research and developmentTotal quality control Following is a list of colleges that offer a wide variety in this course: 1. Jadavpur University, Faculty of Engineering and Technology, Raja S.C. Mullick Road, Kolkata-700032, West Bengal. 2. Guru Jambeshwar University of Science and Technology Hisar-125 001, Haryana 3. Anna University, College of Engineering, Guindy, Chennai-600025 4. BMS College of Engineering, P.O. Box No. : 1908, Bull Temple Road, Basavanagudi, Bangalore - 560019. Freshersworld.com is the No.1 job portal for freshers jobs in India. Check Out website for more Jobs & Careers. http://www.freshersworld.com?src=Youtube - - ***Disclaimer: This is just a career guidance video for fresher candidates. The name, logo and properties mentioned in the video are proprietary property of the respective companies. The career and job information mentioned are an indicative generalised information. In no way Freshersworld.com, indulges into direct or indirect recruitment process of the respective companies.
https://wn.com/Careers_In_Printing_Technology_–_Print_Media,Diploma,B.Tech,M.Tech,Certificate_Courses,Job_Openings
3D Printed Subaru WRX Engine - How Boxer Engines Work

3D Printed Subaru WRX Engine - How Boxer Engines Work

  • Order:
  • Duration: 4:50
  • Updated: 12 Jul 2017
  • views: 376379
videos
How Boxer Engines Work - 3D Printed Subaru WRX Engine Boxer-4 Model: https://www.thingiverse.com/thing:1643878 Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 What is a flat four? What is a boxer engine? This video will explain the benefits of a flat engine, specifically a flat four engine with horizontally opposed pistons. The main advantages of a boxer engine are the primary and secondary engine balance, and the very low center of gravity compared to other engines. H4 engines are one of the best engine designs, however they are more costly than the inline counterpart. The biggest advantage of the boxer engine is the low profile, which keeps the center of gravity low and thus reduces the amount of load transfer you have in the car during braking, cornering, or accelerating, which improves grip. With a lower center of gravity, you can also reduce body roll and choose to use softer springs. Additionally, in the event of a collision, it’s easier to position the engine so that it goes underneath the passenger compartment, rather than into the passenger compartment, for improved safety. Related Videos: Engine Balance - http://youtu.be/aonbwOxooGA Primary Balance - http://youtu.be/9Bdc9CuBOzc Secondary Balance - http://youtu.be/gdHQ8aTfiQQ Straight Four Engine - http://youtu.be/yRWL9czmk_E Don't forget to check out my other pages below! Facebook: http://www.facebook.com/engineeringexplained Official Website: http://www.howdoesacarwork.com Twitter: http://www.twitter.com/jasonfenske13 Instagram: http://www.instagram.com/engineeringexplained Car Throttle: https://www.carthrottle.com/user/engineeringexplained EE Extra: https://www.youtube.com/channel/UCsrY4q8xGPJQbQ8HPQZn6iA NEW VIDEO EVERY WEDNESDAY!
https://wn.com/3D_Printed_Subaru_Wrx_Engine_How_Boxer_Engines_Work
Department of Printing and Media Engineering, Manipal University

Department of Printing and Media Engineering, Manipal University

  • Order:
  • Duration: 2:00
  • Updated: 22 Feb 2017
  • views: 262
videos
The Department of Printing and Media Engineering has the distinction of being the one among the few institutes across India offering a Bachelor’s degree in Print and Media since 1992. The department provides comprehensive in-depth study in modern Graphic Arts Technology and Media Sc
https://wn.com/Department_Of_Printing_And_Media_Engineering,_Manipal_University
3d printing, a diverse tool for engineers, designers and students | Aaron Jenings | TEDxVarna

3d printing, a diverse tool for engineers, designers and students | Aaron Jenings | TEDxVarna

  • Order:
  • Duration: 22:59
  • Updated: 28 Feb 2017
  • views: 763
videos
3D printing is one of the most promising new technologies of our current time, and his goal is to help designers, engineers and students realise its potential and adopt it as a powerful tool in their conceptual and prototyping processes. Aaron Jennings is an industrial designer with a level 1 BcS in Product design. Since 2010, the beginning of his career as a designer, Aaron has utilised 3D printing from prototyping to final working demonstrative devices for the medical and household industry. With his years experience and knowledge of 3D printing, Aaron joined Polymaker - a company engineering and developing the best and most innovative materials for the 3D printing industry. This talk was given at a TEDx event using the TED conference format but independently organized by a local community. Learn more at http://ted.com/tedx
https://wn.com/3D_Printing,_A_Diverse_Tool_For_Engineers,_Designers_And_Students_|_Aaron_Jenings_|_Tedxvarna
Road Printing Machine

Road Printing Machine

  • Order:
  • Duration: 2:20
  • Updated: 14 Jan 2014
  • views: 750581
videos
https://wn.com/Road_Printing_Machine
3D printing human tissue: where engineering meets biology | Tamer Mohamed | TEDxStanleyPark

3D printing human tissue: where engineering meets biology | Tamer Mohamed | TEDxStanleyPark

  • Order:
  • Duration: 12:56
  • Updated: 05 Apr 2017
  • views: 1840
videos
A record amount of money is spent developing new drugs, but drug approval rates are declining and many fatal diseases are left untreated. A big reason behind this is often times current drug testing methods including animal testing don’t accurately predict the human response to drugs. What if we can 3D print living human tissue to test new drugs and study disease? Tamer Mohamed talks about how 3D printing human tissue will allow us to develop better, safer, and cheaper drugs while reducing our reliance on animal testing. Beyond drug development, Tamer imagines a future where replacement organs are 3D printed using a patient’s own cells, avoiding organ wait lists and the risk of rejection. Tamer Mohamed is a biomedical engineer, innovator, and entrepreneur. He is President and CEO of Aspect Biosystems Ltd., a biotechnology company operating at the leading edge of 3D bioprinting and tissue engineering - www.aspectbiosystems.com. Tamer can be reached at tamer@aspectbiosystems.com This talk was given at a TEDx event using the TED conference format but independently organized by a local community. Learn more at https://www.ted.com/tedx
https://wn.com/3D_Printing_Human_Tissue_Where_Engineering_Meets_Biology_|_Tamer_Mohamed_|_Tedxstanleypark
Printing Vascular Tissue

Printing Vascular Tissue

  • Order:
  • Duration: 1:12
  • Updated: 07 Mar 2016
  • views: 6751
videos
Printing vessel vasculature is essential for sustaining functional living tissues. Until now, bioengineers have had difficulty building thick tissues, lacking a method to embed vascular networks. A 3D bioprinting method invented at the Wyss Institute and Harvard SEAS embeds a grid of vasculature into thick tissue laden with human stem cells and connective matrix. Printed within a custom-made housing, this method can be used to create tissue of any shape. Once printed, an inlet and outlet own opposite ends are perfused with fluids, nutrients, and cell growth factors, which control stem cell differentiation and sustain cell functions. By flowing growth factors through the vasculature, stem cells can be differentiated into a variety of tissue cell types. This vascularized 3D printing process could open new doors to tissue replacement and engineering. Footage credit: David Kolesky, Lori Sanders, and Jennifer Lewis For more information, please visit: http://wyss.harvard.edu/viewpressrelease/250/
https://wn.com/Printing_Vascular_Tissue
3D printing tiny batteries | Harvard School of Engineering and Applied Sciences

3D printing tiny batteries | Harvard School of Engineering and Applied Sciences

  • Order:
  • Duration: 0:34
  • Updated: 19 Jun 2013
  • views: 109696
videos
In this video, 3D printing is used to deposit a specially formulated "ink" through a fine nozzle to build a microbattery's anode layer by layer. Unlike an office inkjet printer that dispenses ink droplets onto paper, these inks are formulated to exit the nozzle like toothpaste from a tube and immediately harden into thin layers. The printed anode contains nanoparticles of a lithium metal oxide compound that provide the proper electrochemical properties. To read more about the research, please visit http://hvrd.me/rDgoe. Date: June 18, 2013 Author: Ke Sun, Teng-Sing Wei, Bok Yeop Ahn, Jung Yoon Seo, Shen J. Dillon, and Jennifer A. Lewis
https://wn.com/3D_Printing_Tiny_Batteries_|_Harvard_School_Of_Engineering_And_Applied_Sciences
3D Printing a Model of a Functional Vise! Created from the Ox Tools, Wilton Baby Bullet Vise project

3D Printing a Model of a Functional Vise! Created from the Ox Tools, Wilton Baby Bullet Vise project

  • Order:
  • Duration: 10:17
  • Updated: 25 Apr 2016
  • views: 60062
videos
I wanted to create a holder for my soldering projects, and I decided to 3D print a vise created from a model that Tom, over at Ox Tools put out for his machining project. ▼You can find the model here: http://www.thingiverse.com/thing:1572431 ***This is a model of a functional vice, and should not be used AS a real vice. 3D printed plastic can break and fly apart in unpredictable ways under pressure*** Be sure to check out Tom's amazing videos bringing the real vise to life! In this video I'll go through the steps I took to modify his models, and assembling the functioning vise. I made the changes to the model in Autodesk Fusion 360, printed it on my LulzBot Mini 3D printer. Here is the link to the latest Ox Tools video on the Wilton Baby Bullet Vise: https://www.youtube.com/watch?v=HgxqD... Also be sure to check out Tom's Go Fund Me page for his project https://www.gofundme.com/ywusub58 ----------------------------------------------------------------------------------------------- ▼SUBSCRIBE! https://www.youtube.com/user/diodepre... ▼Want to support Diode Press? Behind the scenes photos, exclusive content and more... http://www.patreon.com/diodepress ▼Viewer Mail/ stickers / postcards / art: Graham Stephens c/o Fantastic Factory 2811 N Pine Grove Ave, Floor 1 Chicago, IL 60657 ▼You can purchase my work here: http://www.diodepress.net/shop You can always find me here: ▼Twitter: http://www.twitter.com/DiodePress ▼Website: http://www.diodepress.net ▼Tumblr: http://www.diodepress.tumblr.com/ ▼Instagram: https://www.instagram.com/instagraham... ▼Facebook: http://www.facebook.com/diodepress ----------------------------------------------------------------------------------------------- Music in this video: "8bit Dungeon Boss" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/b... Severe Tire Damage Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/b... Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...) Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/
https://wn.com/3D_Printing_A_Model_Of_A_Functional_Vise_Created_From_The_Ox_Tools,_Wilton_Baby_Bullet_Vise_Project
Study Product Design Engineering at Swinburne

Study Product Design Engineering at Swinburne

  • Order:
  • Duration: 2:16
  • Updated: 01 Sep 2015
  • views: 4919
videos
Explore the design and development of innovative, sustainable products with a Swinburne product design engineering degree. Learn how you can bring your ideas to life through this unique combination of industrial design and engineering.
https://wn.com/Study_Product_Design_Engineering_At_Swinburne
RIT Students Engineer Historical Printing Press

RIT Students Engineer Historical Printing Press

  • Order:
  • Duration: 2:59
  • Updated: 15 Dec 2016
  • views: 681
videos
A group of four RIT engineering students and a museum studies student set out to reproduce a historically accurate wooden common printing press for the RIT Cary Collection. This is the story of how they brought the past to life through engineering. For more on the project visit: http://www.rit.edu/news/story.php?id=58780
https://wn.com/Rit_Students_Engineer_Historical_Printing_Press
Stratasys 3D Printing Reaches New Heights in Aerospace Engineering at ULA

Stratasys 3D Printing Reaches New Heights in Aerospace Engineering at ULA

  • Order:
  • Duration: 3:36
  • Updated: 14 Apr 2016
  • views: 25800
videos
The growing impact of additive manufacturing in aerospace is best exemplified at United Launch Alliance. In this video, you'll learn how ULA engineers are using Stratasys FDM-based 3D Printers for everything from rapidly prototyping flight parts to producing over 300 tools that increase efficiency on the factory floor to creating innovative new designs for the next generation Vulcan rocket. A few exciting things you'll want to to watch for here: * Practical examples of how ULA is using over 300 printed tools in their manufacturing process * A propulsion component that was re-designed to be "cheaper, lighter and actually performed better" using 3D printing * How ULA is working with Stratasys in materials development, for capabilities like ESD and aero-thermal performance
https://wn.com/Stratasys_3D_Printing_Reaches_New_Heights_In_Aerospace_Engineering_At_Ula
What is Printing? An American Explains Studying Print Engineering in Germany

What is Printing? An American Explains Studying Print Engineering in Germany

  • Order:
  • Duration: 11:37
  • Updated: 28 May 2017
  • views: 144
videos
It's been a few weekends in the making, but it's finally finished. This is both meant to be a summary of our recent excursions to local companies in the industry as well as information for anyone interesting in learning more about print. (These clips all come from an event held every semester at the HdM, the Exkursionswoche.) I hope this video gives you an idea of why print is a fascinating field of study! A big thanks goes out to all of the companies who led our tours, the university Hochschule der Medien, and Mindful Music for the soundtrack.
https://wn.com/What_Is_Printing_An_American_Explains_Studying_Print_Engineering_In_Germany
Printing, Exporting and Creating Engineering Report Templates

Printing, Exporting and Creating Engineering Report Templates

  • Order:
  • Duration: 1:31
  • Updated: 24 May 2017
  • views: 113
videos
An introduction to printing, exporting and creating Engineering Report templates in SCIA Engineer
https://wn.com/Printing,_Exporting_And_Creating_Engineering_Report_Templates
3D printing of sustainable concrete structures

3D printing of sustainable concrete structures

  • Order:
  • Duration: 1:40
  • Updated: 03 Mar 2016
  • views: 32667
videos
The goal of the TU/e 3D Concrete Printing (3DCP) research program is to establish concrete printing as a new method to manufacture concrete elements and buildings, and to fundamentally understand its processes. The research group operates and develops its own 3D Concrete Printer at the department of the Built Environment. The program is run by the chair of Concrete Structures of the Unit Structural Design, in close collaboration with the chair of Innovative Structural Design and chair of Architectural Design and Engineering.
https://wn.com/3D_Printing_Of_Sustainable_Concrete_Structures
×